diff --git a/.cproject b/.cproject
index 9c8f411..6da7c60 100644
--- a/.cproject
+++ b/.cproject
@@ -185,11 +185,7 @@
-
-
-
-
-
-
+
+
\ No newline at end of file
diff --git a/.project b/.project
index 8834554..a8753ad 100644
--- a/.project
+++ b/.project
@@ -1,6 +1,6 @@
- stm32l4a6zg-freertos
+ stm32l4a6zg-f0x.at1
diff --git a/Core/Inc/at1_defines.h b/Core/Inc/at1_defines.h
index 819a27e..9675402 100644
--- a/Core/Inc/at1_defines.h
+++ b/Core/Inc/at1_defines.h
@@ -26,7 +26,7 @@ extern "C" {
#define STR(x) STR_HELPER(x)
#endif
#define VERSION_MAJOR 0
-#define VERSION_MINOR 1
+#define VERSION_MINOR 2
#define PROGRAM_ID "f0x.at1 Version " STR(VERSION_MAJOR) "." STR(VERSION_MINOR)
#define VERSION_STRING STR(VERSION_MAJOR) "." STR(VERION_MINOR)
//#define DATE __DATE__
diff --git a/Core/Inc/commands.h b/Core/Inc/commands.h
index 9ede63e..98a9606 100644
--- a/Core/Inc/commands.h
+++ b/Core/Inc/commands.h
@@ -16,10 +16,16 @@ extern "C" {
#endif
//struct command_ctx_s *command_inst;
-typedef struct command_ctx_s *command_inst_t;
+//typedef struct command_ctx_s *command_inst_t;
+extern RTC_HandleTypeDef hrtc;
/* function prototypes */
-int not_implemented(command_inst_t inst, char *args);
+int do_help(char *args);
+int do_devid(char *args);
+int do_test(/*command_inst_t inst,*/ char *args);
+int do_time(char *args);
+
+int cmd_interpreter(char * cmdline);
#ifdef __cplusplus
diff --git a/Core/Inc/stm32_si5351.h b/Core/Inc/stm32_si5351.h
index a3659c8..c0fbecf 100644
--- a/Core/Inc/stm32_si5351.h
+++ b/Core/Inc/stm32_si5351.h
@@ -94,13 +94,14 @@ typedef struct __SI5351_HandleTypeDef *si5351_inst_t;
/* Exported constants --------------------------------------------------------*/
/** @enum errno_t Error Number Constants, @TODO could also errno.h included!!
*/
-#if !defined _SYS_ERRNO_H_ || !defined __ERRNO_H__
+#if !defined _SYS_ERRNO_H_ && !defined __ERRNO_H__
typedef enum {
EPERM = 1, /*!< Operation not permitted */
EIO = 5, /*!< I/O error */
ENOMEM = 12, /*!< Out of memory */
- ENODEV = 19, /*!< No such device */
+ EFAULT = 14, /*!< Bad address */
EBUSY = 16, /*!< Device or resource busy */
+ ENODEV = 19, /*!< No such device */
EINVAL = 22, /*!< Invalid argument */
EADDRINUSE = 98,/*!< Address already in use */
ETIMEDOUT = 116 /*!< Connection timed out */
diff --git a/Core/Inc/stm32l4xx_it.h b/Core/Inc/stm32l4xx_it.h
index 13dc2e9..c56ebdf 100644
--- a/Core/Inc/stm32l4xx_it.h
+++ b/Core/Inc/stm32l4xx_it.h
@@ -53,6 +53,7 @@ void BusFault_Handler(void);
void UsageFault_Handler(void);
void DebugMon_Handler(void);
void TIM6_DAC_IRQHandler(void);
+void DMA2_Channel7_IRQHandler(void);
void LPUART1_IRQHandler(void);
/* USER CODE BEGIN EFP */
diff --git a/Core/Src/commands.c b/Core/Src/commands.c
index d5bc8e4..4346614 100644
--- a/Core/Src/commands.c
+++ b/Core/Src/commands.c
@@ -7,43 +7,182 @@
* created 2022-06-04
*
******************************************************************************/
+#include "main.h"
#include "cmsis_os.h"
#include
+#include
+#include
+#include //strchr
+#include //bsearch
+#include "helper.h" //ltrim
#include "commands.h"
-typedef struct command_ctx_s {
+/*
+ typedef struct command_ctx_s {
osThreadId_t thread_id;
osMutexId_t mutex;
char *last_cmd;
size_t last_cmd_size;
} command_ctx_t;
-
+*/
typedef enum {
+ CMD_NO_FLAG = 0x00,
CMD_HIDDEN = 0x01, /*!< Not shown in help but listed with "help all" or with "?" */
CMD_SECRET = 0x02, /*!< Not shown in help - hidden and secret commands */
CMD_ADMIN = 0x04, /*!< Only an administrator or privileged person can use this command */
CMD_NOT_IMPLEMENTED = 0x80 /*!< A command which is not implemented yet */
} cmd_flags_t;
-#define CMD_LENGTH 16
+#define CMD_LENGTH 16
+#define MAXLINELENGTH 40
-typedef struct{
+typedef struct {
const char name[CMD_LENGTH]; /*!< command name */
const uint8_t significantlength; /*!< length of command for the compare function */
const uint8_t flag; /*!< command flags, i.e. CMD_HIDDEN, CMD_SECRET, CMD_ADMIN, etc. */
- int(*func)(command_ctx_t *ctx, char *args);
+ int (*func)(/*command_ctx_t *ctx,*/ char *args);
} cmd_table_t;
static const cmd_table_t cmd_table[] = {
- {"altitude", 1, CMD_NOT_IMPLEMENTED, not_implemented },
- {"date", 1, CMD_NOT_IMPLEMENTED, not_implemented },
+ {"admin", 2, CMD_ADMIN, do_test },
+ {"altitude", 1, CMD_NO_FLAG, do_test },
+ {"date", 1, CMD_NO_FLAG, do_time },
+ {"devid", 3, CMD_HIDDEN, do_devid },
+ {"help", 1, CMD_NO_FLAG, do_help },
+ {"hidden", 2, CMD_HIDDEN, do_test },
+ {"secret", 1, CMD_SECRET, do_test },
+ {"time", 1, CMD_NO_FLAG, do_time },
};
-int not_implemented(command_ctx_t *ctx, char *args) {
- (void) *ctx;
+int do_test(char *args) {
(void) *args;
+ printf("not implemented.\n");
return 0;
}
+/*!
+ * @brief compares two strings up to n characters, and next gets the pointer to the 2nd word in the string s1
+ *
+ * @pre s1, s2 and n not allowed to be 0
+ *
+ * @param s1
+ * @param next
+ * @param s2
+ * @param n
+ * @return int if the s1 and s2 are the same till n characters its 0, if s1 > s2 it becomes 1, else -1
+ */
+int cmdncasecmp(const char *s1, char **next, const char *s2, size_t n)
+{
+ if (n == 0 || s1 == NULL || s2 == NULL) {
+ if (next) *next = NULL;
+ if (s2 == NULL && s1 != NULL) return 1;
+ if (s1 == NULL && s2 != NULL) return -1;
+ return 0;
+ }
+ int ret;
+ while ((ret = ((unsigned char)tolower(*s1) - (unsigned char)tolower(*s2))) == 0
+ && *s1 != ' ' && *s1 && *s2) {
+ if (n) n--;
+ s1++;
+ s2++;
+ }
+ if (next) *next = (char *) s1;
+ if (n == 0 && (*s1 == ' ' || !*s1))
+ return 0;
+ return ret;
+}
+
+static int compar(const void *a, const void *b)
+{
+ cmd_table_t * cmd = (cmd_table_t *)b;
+ return cmdncasecmp(a, NULL, cmd->name, cmd->significantlength);
+}
+
+
+int cmd_interpreter(char * cmdline) {
+ char * ptr;
+ const cmd_table_t *entry;
+ int rv = 0;
+
+ ptr = strchr(cmdline, ' ');
+ if (ptr) {
+ *ptr = '\0';
+ ptr++;
+ ptr = ltrim(ptr);
+ }
+ entry = bsearch(cmdline, cmd_table, sizeof(cmd_table)/sizeof(cmd_table[0]), sizeof(cmd_table[0]), compar);
+ if (entry == NULL) {
+ printf("command \"%s\" not found.\n", cmdline);
+ } else {
+ printf("command: \"%s\" ...\n", entry->name );
+ if (*ptr != '\0')
+ printf("with parameter: %s\n", ptr );
+ rv = entry->func(ptr);
+ }
+ return rv;
+}
+
+int do_devid(char *args) {
+
+ (void)args;
+ union myUnion {
+ uint32_t myint[2];
+ char mychar[8];
+ } my;
+
+ printf("DEVID: 0x%08lx\n", HAL_GetDEVID());
+ printf("REVID: 0x%08lx\n", HAL_GetREVID());
+ printf("UID: 0x%08lx %08lx %08lx\n", HAL_GetUIDw2(), HAL_GetUIDw1(), HAL_GetUIDw0());
+
+ my.myint[1] = HAL_GetUIDw2();
+ my.myint[0] = HAL_GetUIDw1();
+ my.mychar[8] = '\0';
+
+ printf("=> Lot Number: %s\n", my.mychar);
+ printf("=> Wafer Number: %u\n", (uint8_t)(HAL_GetUIDw1() & 0xff));
+ return 0;
+}
+
+int do_time(char *args) {
+
+ HAL_StatusTypeDef status;
+ RTC_TimeTypeDef time;
+ RTC_DateTypeDef date;
+
+ if (!args) {
+ status = HAL_RTC_GetTime(&hrtc, &time, RTC_FORMAT_BIN);
+ if (status != HAL_OK)
+ puts("HAL_RTC_GetTime problem...");
+
+ status = HAL_RTC_GetDate(&hrtc, &date, RTC_FORMAT_BIN);
+ printf("%02d%02d-%02d-%02d %02d:%02d:%02d\n", (date.Year < 22) ? 21 : 20, date.Year, date.Month, date.Date, time.Hours, time.Minutes, time.Seconds);
+ }
+ return 0;
+}
+
+int do_help(char *args) {
+
+ int all = cmdncasecmp(args, NULL, "all", 1);
+ const cmd_table_t *cmd = cmd_table;
+ int j = 0;
+ int n = 0;
+ int rv = 0;
+
+ puts("Commands:");
+
+ for (size_t i = 0; i < (sizeof(cmd_table)/sizeof(cmd_table[0])); i++, cmd++) {
+ if (cmd->flag != CMD_SECRET && (cmd->flag != CMD_HIDDEN || !all)) {
+ if (n >= MAXLINELENGTH) {
+ puts(",");
+ n = 0;
+ }
+ // n += printf("%s%s (%.*s)", n?", ":"", cmd->name, cmd->significantlength, cmd->name);
+ n += printf("%s(%.*s)%s", n?", ":"", cmd->significantlength, cmd->name, cmd->name + cmd->significantlength);
+ j++;
+ }
+ }
+ printf("\n%d commands found.\n", j);
+ return rv;
+}
diff --git a/Core/Src/main.c b/Core/Src/main.c
index 4ab0ea7..8feebfe 100644
--- a/Core/Src/main.c
+++ b/Core/Src/main.c
@@ -26,6 +26,10 @@
#include "at1_defines.h"
#include "stm32_si5351.h"
#include "commands.h"
+#include
+#include "ringbuf.h"
+#include "ringbuf_test.h" // test the ringbuffer
+#include "helper.h" // my toolbox for strings, etc.
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
@@ -35,6 +39,7 @@
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
+
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
@@ -43,9 +48,10 @@
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
- I2C_HandleTypeDef hi2c1;
+I2C_HandleTypeDef hi2c1;
UART_HandleTypeDef hlpuart1;
+DMA_HandleTypeDef hdma_lpuart_rx;
RTC_HandleTypeDef hrtc;
@@ -60,8 +66,8 @@ const osThreadAttr_t defaultTask_attributes = {
osThreadId_t terminalTaskHandle;
const osThreadAttr_t terminalTask_attributes = {
.name = "terminalTask",
- .stack_size = 128 * 4,
- .priority = (osPriority_t) osPriorityBelowNormal,
+ .stack_size = 256 * 4,
+ .priority = (osPriority_t) osPriorityNormal,
};
/* Definitions for morseTask */
osThreadId_t morseTaskHandle;
@@ -82,30 +88,63 @@ osSemaphoreId_t si5351Handle;
const osSemaphoreAttr_t si5351_attributes = {
.name = "si5351"
};
+/* Definitions for command */
+osSemaphoreId_t commandHandle;
+const osSemaphoreAttr_t command_attributes = {
+ .name = "command"
+};
/* USER CODE BEGIN PV */
int leds_on = 1;
uint8_t UART1_rxBuffer[12] = {0};
+uint8_t UART1_txBuffer[12];
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
+static void MX_DMA_Init(void);
+static void MX_I2C1_Init(void);
static void MX_LPUART1_UART_Init(void);
static void MX_RTC_Init(void);
-static void MX_I2C1_Init(void);
void StartDefaultTask(void *argument);
void start_terminal_task(void *argument);
void start_morse_task(void *argument);
void start_clk2_task(void *argument);
/* USER CODE BEGIN PFP */
-// redirect the output of the printf function to the USART print function
-// is calling fputc to transmit the output via the USART.
-#define PUTCHAR_PROTOTYPE
+void print_system_info(void);
+void ringbuffer_callback(uint16_t delimiterfound, void * cb_data);
/* USER CODE END PFP */
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
+#define rxbuf_size 64
+#define mainbuf_size 64
+
+uint8_t rxbuf[rxbuf_size];
+uint8_t done = 0;
+hring ring;
+
+void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) {
+ if (huart->Instance == LPUART1) {
+ ringbuf_push(ring, rxbuf, Size);
+ //ringbuf_dump(ring);
+ HAL_UARTEx_ReceiveToIdle_DMA(huart, rxbuf, rxbuf_size);
+ //__HAL_DMA_DISABLE_IT(&hdma_lpuart_rx, DMA_IT_HT);
+ } else {
+ __NOP();
+ }
+}
+
+// void (*ringbuf_rcv_cb_t)(uint16_t delimiterfound, void* cb_data);
+void ringbuffer_callback(uint16_t delimiterfound, void * cb_data) {
+
+ (void)cb_data;
+ (void)delimiterfound;
+
+ HAL_GPIO_TogglePin(LD1_GPIO_Port, LD1_Pin);
+ osSemaphoreRelease(commandHandle);
+}
/* USER CODE END 0 */
@@ -118,7 +157,6 @@ int main(void)
/* USER CODE BEGIN 1 */
/* int status = 0; */
-
/* USER CODE END 1 */
/* MCU Configuration--------------------------------------------------------*/
@@ -139,13 +177,30 @@ int main(void)
/* Initialize all configured peripherals */
MX_GPIO_Init();
+ MX_DMA_Init();
+ MX_I2C1_Init();
MX_LPUART1_UART_Init();
MX_RTC_Init();
- MX_I2C1_Init();
/* USER CODE BEGIN 2 */
-
si5351_inst_t si5351_inst = 0;
+ print_system_info();
+
+
+ // do some tests for ringbuf.h library
+
+ //struct ringbuf * ring;
+
+ ring = ringbuf_create(mainbuf_size, RINGBUF_ALLOWOVERWRITE);
+ if (ring == NULL)
+ puts("Can't create memory for ringbuffer");
+ HAL_UARTEx_ReceiveToIdle_DMA(&hlpuart1, rxbuf, rxbuf_size);
+ __HAL_DMA_DISABLE_IT(&hdma_lpuart_rx, DMA_IT_HT);
+
+ (void)ringbuf_callback_register(ring, ringbuffer_callback, NULL);
+// #define NDEBUG
+ // ringbuf_test();
+
// 1st SI5351 chip at the I2C bus "hi2c1", address line A0 = 0
si5351_inst = si5351_init(&hi2c1, 25000000, 0x60, 0);
{
@@ -216,7 +271,7 @@ int main(void)
#endif
- HAL_Delay(20000);
+ HAL_Delay(1000);
#if 0
while (1) {
@@ -265,15 +320,13 @@ int main(void)
// si5351_enable_output(si5351_inst,1);
// HAL_Delay(1000);
-#if 1
+#if 0
si5351_set_clk0(si5351_inst, 3550000);
si5351_set_clk(si5351_inst, 3570000, 2, SI5351_PLLB);
si5351_enable_output(NULL,2);
#endif
-
-
/* USER CODE END 2 */
/* Init scheduler */
@@ -287,6 +340,9 @@ int main(void)
/* creation of si5351 */
si5351Handle = osSemaphoreNew(1, 1, &si5351_attributes);
+ /* creation of command */
+ commandHandle = osSemaphoreNew(1, 1, &command_attributes);
+
/* USER CODE BEGIN RTOS_SEMAPHORES */
/* add semaphores, ... */
/* USER CODE END RTOS_SEMAPHORES */
@@ -301,16 +357,16 @@ int main(void)
/* Create the thread(s) */
/* creation of defaultTask */
- //defaultTaskHandle = osThreadNew(StartDefaultTask, NULL, &defaultTask_attributes);
+ defaultTaskHandle = osThreadNew(StartDefaultTask, NULL, &defaultTask_attributes);
/* creation of terminalTask */
terminalTaskHandle = osThreadNew(start_terminal_task, NULL, &terminalTask_attributes);
/* creation of morseTask */
- //morseTaskHandle = osThreadNew(start_morse_task, (void*) si5351_inst, &morseTask_attributes);
+ morseTaskHandle = osThreadNew(start_morse_task, (void*) si5351_inst, &morseTask_attributes);
/* creation of clk2Task */
- //clk2TaskHandle = osThreadNew(start_clk2_task, (void*) si5351_inst, &clk2Task_attributes);
+ clk2TaskHandle = osThreadNew(start_clk2_task, (void*) si5351_inst, &clk2Task_attributes);
/* USER CODE BEGIN RTOS_THREADS */
/* add threads, ... */
@@ -469,7 +525,9 @@ static void MX_LPUART1_UART_Init(void)
hlpuart1.Init.Mode = UART_MODE_TX_RX;
hlpuart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
hlpuart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
- hlpuart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+ hlpuart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_RXOVERRUNDISABLE_INIT|UART_ADVFEATURE_DMADISABLEONERROR_INIT;
+ hlpuart1.AdvancedInit.OverrunDisable = UART_ADVFEATURE_OVERRUN_DISABLE;
+ hlpuart1.AdvancedInit.DMADisableonRxError = UART_ADVFEATURE_DMA_DISABLEONRXERROR;
if (HAL_UART_Init(&hlpuart1) != HAL_OK)
{
Error_Handler();
@@ -544,6 +602,22 @@ static void MX_RTC_Init(void)
}
+/**
+ * Enable DMA controller clock
+ */
+static void MX_DMA_Init(void)
+{
+
+ /* DMA controller clock enable */
+ __HAL_RCC_DMA2_CLK_ENABLE();
+
+ /* DMA interrupt init */
+ /* DMA2_Channel7_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(DMA2_Channel7_IRQn, 5, 0);
+ HAL_NVIC_EnableIRQ(DMA2_Channel7_IRQn);
+
+}
+
/**
* @brief GPIO Initialization Function
* @param None
@@ -699,12 +773,28 @@ static void MX_GPIO_Init(void)
}
/* USER CODE BEGIN 4 */
-void HAL_UART_RxCpltCallback(UART_HandleTypeDef *hlpuart) {
- HAL_UART_Transmit(&hlpuart1, UART1_rxBuffer, 1, 100);
- HAL_UART_Receive_IT(&hlpuart1, UART1_rxBuffer, 1);
-}
+/**
+ * @brief UART error callback.
+ * @param huart UART handle.
+ * @retval None
+ */
+__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UART_ErrorCallback can be implemented in the user file.
+ */
+ printf("UART error %ld\n", huart->ErrorCode);
+ if (HAL_UART_Init(&hlpuart1) != HAL_OK)
+ {
+ Error_Handler();
+ }
+}
+
/**
* @brief Retargets the C library printf function to the USART.
* @param None
@@ -715,25 +805,41 @@ int __io_putchar(int ch)
/* Place your implementation of fputc here */
/* e.g. write a character to the USART1 and Loop until the end of transmission */
uint8_t xch = (uint8_t)ch;
+ volatile HAL_StatusTypeDef hstat;
/*
- * Only for Windows PCs:
+ * Only for Windows PCs or Eclipse Terminal:
*/
-#if 0
- if(ch=='\n')
- putchar('\r');
+#if 1
+ if(ch=='\n') /* 0xA, 10, LF */
+ __io_putchar('\r'); /* 0xD, 13, CR */
#endif
- HAL_UART_Transmit(&hlpuart1, &xch, 1, HAL_MAX_DELAY);
+ // HAL_UART_Transmit(&hlpuart1, &xch, 1, HAL_MAX_DELAY);
+ do {
+ hstat = HAL_UART_Transmit_IT(&hlpuart1, &xch, 1);
+ } while (hstat == HAL_BUSY);
return ch;
}
int _write(int fd, unsigned char *p, int len)
{
+ int l = len;
(void)fd;
- while (len--)
+ while (l--)
__io_putchar(*p++);
return len;
}
+//int _write_r(void *reent, int fd, char *p, size_t len)
+//{
+// return _write(fd, p, len);
+//}
+
+void print_system_info(void) {
+ puts("\n**************************************");
+ puts(PROGRAM_ID " " AUTHOR_STRING);
+ puts("Compiled: " __DATE__ " " __TIME__);
+}
+
void make_di_dah(si5351_inst_t inst, unsigned int dah, uint32_t delay, uint8_t clk) {
#define SEMAPHORE 0
/* inner function, no need to check inst, clk, nor delay */
@@ -782,9 +888,9 @@ void morse(si5351_inst_t inst, char * s, uint32_t delay, uint8_t clk) {
return;
while ((ch = *s++)) {
- /* ascii code: numbers b/w 0x30 - 0x39 chars b/w 0x41 - 0x5A and 0x61 - 0x7A */
+ /* ASCII code: numbers b/w 0x30 - 0x39 chars b/w 0x41 - 0x5A and 0x61 - 0x7A */
if ((ch > 0x40 && ch < 0x5B) || (ch > 0x60 && ch < 0x7B)) {
- ch &= 0xDF; // make uppercase
+ ch &= 0xDF; // make upper case
ch = mcode[ch - 0x41]; // index 0 for 'A'
} else if (ch > 0x2F && ch < 0x3A) {
ch = mcode[ch - 22];
@@ -853,6 +959,7 @@ void morse(si5351_inst_t inst, char * s, uint32_t delay, uint8_t clk) {
osDelay(3 * delay); //word inter character space (gap b/w the characters of a word) 3 units
}
}
+
/* USER CODE END 4 */
/* USER CODE BEGIN Header_StartDefaultTask */
@@ -869,29 +976,38 @@ void StartDefaultTask(void *argument)
int sw, sw_last = GPIO_PIN_RESET;
- int counter = 10;
+ int counter = 6;
/* Infinite loop */
for(;;) {
- // HAL_GPIO_TogglePin(LD1_GPIO_Port, LD1_Pin);
- HAL_GPIO_WritePin(LD1_GPIO_Port, LD1_Pin, GPIO_PIN_SET);
+ HAL_GPIO_TogglePin(LD1_GPIO_Port, LD1_Pin);
+ //HAL_GPIO_WritePin(LD1_GPIO_Port, LD1_Pin, GPIO_PIN_SET);
osDelay(100);
- HAL_GPIO_WritePin(LD1_GPIO_Port, LD1_Pin, GPIO_PIN_RESET);
+ HAL_GPIO_TogglePin(LD1_GPIO_Port, LD1_Pin);
+ //HAL_GPIO_WritePin(LD1_GPIO_Port, LD1_Pin, GPIO_PIN_RESET);
sw = HAL_GPIO_ReadPin(B1_GPIO_Port, B1_Pin);
if (sw_last == GPIO_PIN_RESET && sw == GPIO_PIN_SET) {
leds_on = !leds_on;
counter--;
}
sw_last = sw;
- osDelay(2000);
- if (!counter)
- break;
+ osDelay(5000);
+ if (counter == 4) {
+ vTaskSuspend(morseTaskHandle);
+ }
+ if (counter == 2) {
+ vTaskSuspend(clk2TaskHandle);
+ }
+ if (!counter) {
+ vTaskSuspend(NULL);
+ }
}
/* USER CODE END 5 */
}
/* USER CODE BEGIN Header_start_terminal_task */
+
/**
* @brief Function implementing the terminalTask thread.
* @param argument: Not used
@@ -903,22 +1019,39 @@ void start_terminal_task(void *argument)
/* USER CODE BEGIN start_terminal_task */
(void)argument;
- HAL_StatusTypeDef status;
- RTC_TimeTypeDef time;
- RTC_DateTypeDef date;
- uint8_t LPUART1_rxBuffer[100];
+
+ char data[128];
+ char *tdata = data;
+ int bytes;
+ int rv;
/* Infinite loop */
for(;;) {
- HAL_UART_Receive_IT(&hlpuart1, UART1_rxBuffer, 1);
-
- status = HAL_RTC_GetTime(&hrtc, &time, RTC_FORMAT_BIN);
- if (status != HAL_OK)
- puts("HAL_RTC_GetTime problem...");
- status = HAL_RTC_GetDate(&hrtc, &date, RTC_FORMAT_BIN);
- printf("%02d%02d-%02d-%02d %02d:%02d:%02d\n", (date.Year < 22) ? 21 : 20, date.Year, date.Month, date.Date, time.Hours, time.Minutes, time.Seconds);
-
- osDelay(999);
+ //HAL_UART_Receive_IT(&hlpuart1, UART1_rxBuffer, 1);
+ // osSemaphoreRelease is in the callback function when a command is entered
+ osSemaphoreAcquire(commandHandle, osWaitForever);
+// status = HAL_RTC_GetTime(&hrtc, &time, RTC_FORMAT_BIN);
+// if (status != HAL_OK)
+// puts("HAL_RTC_GetTime problem...");
+// status = HAL_RTC_GetDate(&hrtc, &date, RTC_FORMAT_BIN);
+// printf("%02d%02d-%02d-%02d %02d:%02d:%02d\n", (date.Year < 22) ? 21 : 20, date.Year, date.Month, date.Date, time.Hours, time.Minutes, time.Seconds);
+ //ringbuf_dump(ring);
+ do {
+ bytes = ringbuf_read(ring, data);
+ printf("READ (%d): %s\n",bytes, data);
+ if (bytes) {
+ ringbuf_dump(ring);
+ tdata = trim(data);
+ printf("TRIMMED (%d): %s\n",strlen(tdata), tdata);
+ rv = cmd_interpreter(tdata);
+ if (rv) {
+ printf("ERROR: %d\n", -rv);
+ }
+ }
+ if (ringbuf_is_empty(ring))
+ break;
+ } while (bytes);
+ //osDelay(9999);
}
/* USER CODE END start_terminal_task */
}
@@ -943,7 +1076,7 @@ void start_morse_task(void *argument)
/* Infinite loop */
for (;;) {
// check clock RTC for e.g. cycle of 1 minutes TX with 4 minutes pause period
- if(++i % 16) { /* do this for 7 of 8 times, ones morse in high speed my call */
+ if(++i % 32) { /* do this 31 times, then Morse my callsign once at high speed */
morse(inst, "MO", morsedelay, clk);
} else {
morsedelay = delay/3;
@@ -970,12 +1103,12 @@ void start_clk2_task(void *argument)
si5351_inst_t inst = argument;
int i = 0;
uint32_t morsedelay = delay;
- si5351_set_clk (inst, 3550000, clk, SI5351_PLLB);
+ si5351_set_clk (inst, 3582000, clk, SI5351_PLLB);
/* Infinite loop */
for (;;) {
// check clock RTC for e.g. cycle of 1 minutes TX with 4 minutes pause period
- if(++i % 16) { /* do this for 7 of 8 times, ones morse in high speed my call */
+ if(++i % 32) { /* do this 31 times, then Morse my callsign once at high speed */
morse(inst, "MOe", morsedelay, clk);
} else {
morsedelay = delay/3;
@@ -1000,7 +1133,7 @@ void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
/* USER CODE BEGIN Callback 0 */
/* USER CODE END Callback 0 */
-if (htim->Instance == TIM6) {
+ if (htim->Instance == TIM6) {
HAL_IncTick();
}
/* USER CODE BEGIN Callback 1 */
@@ -1017,6 +1150,7 @@ void Error_Handler(void)
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
__disable_irq();
+ puts("ERROR HANDLER");
while (1)
{
}
@@ -1036,7 +1170,7 @@ void assert_failed(uint8_t *file, uint32_t line)
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
- printf("Wrong parameters value: file %s on line %d\r\n", file, line);
+ printf("Wrong parameters value: file %s on line %u\r\n", file, line);
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */
diff --git a/Core/Src/stm32_si5351.c b/Core/Src/stm32_si5351.c
index 626066a..3122056 100644
--- a/Core/Src/stm32_si5351.c
+++ b/Core/Src/stm32_si5351.c
@@ -22,10 +22,10 @@
/* Includes ------------------------------------------------------------------*/
#include
+#include
#ifdef DEBUG
#define SI5351_DEBUG 0
#include
-#include
#endif
#include
@@ -45,7 +45,7 @@ typedef struct __SI5351_HandleTypeDef {
size_t datasize; /*!< size of data, set to 0 if not used */
struct __SI5351_HandleTypeDef *next; /*!< next pointer to the following structure when there are several instances */
#ifdef SI5351_DEBUG
- char debug_msg[1000]; /*!< debugging messages for extesive tests of the Si5351 chip, not required */
+ char debug_msg[1000]; /*!< debugging messages for extensive tests of the Si5351 chip, not required */
#endif
uint8_t clk_is_pllb; /*!< assignment of PLLA or PLLB per CLK #, if bit set to 1 ...PLLB */
uint8_t clk_is_disabled; /*!< assignment of Output Enable Control, app. Register 3 */
@@ -115,7 +115,9 @@ si5351_HandleTypeDef * first_handle = NULL; /* pointer to the first instance */
int si5351_errno = 0; /* error_number for functions whith return == NULL */
/* Private function prototypes -----------------------------------------------*/
+#ifdef DEBUG
int __fprintb(FILE *stream, void *value, size_t size);
+#endif
int si5351_read(si5351_inst_t instance, uint8_t regaddr, uint8_t *data, uint16_t size);
int si5351_write(si5351_inst_t instance, uint8_t regaddr, uint8_t *data, uint16_t size);
int calculation(uint32_t frequency, uint32_t xtal, synthesis_t *synth);
@@ -665,6 +667,7 @@ int si5351_set_clk_phase(si5351_inst_t inst, uint32_t frequency, double phase, u
//pll_frequency = ((double)synth.pll_multiplier + (double)(synth.pll_numerator / synth.pll_denominator)) * (double)inst->xtal_frequency;
//phaseoff = 4.0 * pll_frequency;
(void)phaseoff;
+ (void)pll_frequency;
} else {
inst->clk_has_phase_shift &= (uint8_t)~(1u << clk); /* reset phase shift */
@@ -870,6 +873,7 @@ int si5351_read_data(si5351_inst_t inst, void * data) {
}
#endif
+#ifdef DEBUG
/*!
* @brief Output the value in binary representation and in groups of
* bytes
@@ -927,4 +931,4 @@ char * si5351_read_register_debug(si5351_inst_t inst, char *buf, size_t bufsize,
cx += snprintf(buf + cx, bufsize - (size_t)cx, "]");
return buf;
}
-
+#endif //DEBUG
diff --git a/Core/Src/stm32l4xx_hal_msp.c b/Core/Src/stm32l4xx_hal_msp.c
index e163b55..f96cf7e 100644
--- a/Core/Src/stm32l4xx_hal_msp.c
+++ b/Core/Src/stm32l4xx_hal_msp.c
@@ -23,6 +23,7 @@
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
+extern DMA_HandleTypeDef hdma_lpuart_rx;
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */
@@ -196,6 +197,24 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
GPIO_InitStruct.Alternate = GPIO_AF8_LPUART1;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
+ /* LPUART1 DMA Init */
+ /* LPUART_RX Init */
+ hdma_lpuart_rx.Instance = DMA2_Channel7;
+ hdma_lpuart_rx.Init.Request = DMA_REQUEST_4;
+ hdma_lpuart_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
+ hdma_lpuart_rx.Init.PeriphInc = DMA_PINC_DISABLE;
+ hdma_lpuart_rx.Init.MemInc = DMA_MINC_ENABLE;
+ hdma_lpuart_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+ hdma_lpuart_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+ hdma_lpuart_rx.Init.Mode = DMA_NORMAL;
+ hdma_lpuart_rx.Init.Priority = DMA_PRIORITY_LOW;
+ if (HAL_DMA_Init(&hdma_lpuart_rx) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ __HAL_LINKDMA(huart,hdmarx,hdma_lpuart_rx);
+
/* LPUART1 interrupt Init */
HAL_NVIC_SetPriority(LPUART1_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(LPUART1_IRQn);
@@ -228,6 +247,9 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
*/
HAL_GPIO_DeInit(GPIOG, STLK_RX_Pin|STLK_TX_Pin);
+ /* LPUART1 DMA DeInit */
+ HAL_DMA_DeInit(huart->hdmarx);
+
/* LPUART1 interrupt DeInit */
HAL_NVIC_DisableIRQ(LPUART1_IRQn);
/* USER CODE BEGIN LPUART1_MspDeInit 1 */
diff --git a/Core/Src/stm32l4xx_hal_timebase_tim.c b/Core/Src/stm32l4xx_hal_timebase_tim.c
index c3e7789..385b996 100644
--- a/Core/Src/stm32l4xx_hal_timebase_tim.c
+++ b/Core/Src/stm32l4xx_hal_timebase_tim.c
@@ -41,14 +41,11 @@ TIM_HandleTypeDef htim6;
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
{
RCC_ClkInitTypeDef clkconfig;
- uint32_t uwTimclock = 0;
- uint32_t uwPrescalerValue = 0;
- uint32_t pFLatency;
- /*Configure the TIM6 IRQ priority */
- HAL_NVIC_SetPriority(TIM6_DAC_IRQn, TickPriority ,0);
+ uint32_t uwTimclock, uwAPB1Prescaler;
- /* Enable the TIM6 global Interrupt */
- HAL_NVIC_EnableIRQ(TIM6_DAC_IRQn);
+ uint32_t uwPrescalerValue;
+ uint32_t pFLatency;
+ HAL_StatusTypeDef status = HAL_OK;
/* Enable TIM6 clock */
__HAL_RCC_TIM6_CLK_ENABLE();
@@ -56,8 +53,18 @@ HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
/* Get clock configuration */
HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);
+ /* Get APB1 prescaler */
+ uwAPB1Prescaler = clkconfig.APB1CLKDivider;
/* Compute TIM6 clock */
- uwTimclock = 2*HAL_RCC_GetPCLK1Freq();
+ if (uwAPB1Prescaler == RCC_HCLK_DIV1)
+ {
+ uwTimclock = HAL_RCC_GetPCLK1Freq();
+ }
+ else
+ {
+ uwTimclock = 2UL * HAL_RCC_GetPCLK1Freq();
+ }
+
/* Compute the prescaler value to have TIM6 counter clock equal to 1MHz */
uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000U) - 1U);
@@ -74,15 +81,33 @@ HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
htim6.Init.Prescaler = uwPrescalerValue;
htim6.Init.ClockDivision = 0;
htim6.Init.CounterMode = TIM_COUNTERMODE_UP;
+ htim6.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
- if(HAL_TIM_Base_Init(&htim6) == HAL_OK)
+ status = HAL_TIM_Base_Init(&htim6);
+ if (status == HAL_OK)
{
/* Start the TIM time Base generation in interrupt mode */
- return HAL_TIM_Base_Start_IT(&htim6);
+ status = HAL_TIM_Base_Start_IT(&htim6);
+ if (status == HAL_OK)
+ {
+ /* Enable the TIM6 global Interrupt */
+ HAL_NVIC_EnableIRQ(TIM6_DAC_IRQn);
+ /* Configure the SysTick IRQ priority */
+ if (TickPriority < (1UL << __NVIC_PRIO_BITS))
+ {
+ /* Configure the TIM IRQ priority */
+ HAL_NVIC_SetPriority(TIM6_DAC_IRQn, TickPriority, 0U);
+ uwTickPrio = TickPriority;
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+ }
}
- /* Return function status */
- return HAL_ERROR;
+ /* Return function status */
+ return status;
}
/**
diff --git a/Core/Src/stm32l4xx_it.c b/Core/Src/stm32l4xx_it.c
index 62f399d..3d959d5 100644
--- a/Core/Src/stm32l4xx_it.c
+++ b/Core/Src/stm32l4xx_it.c
@@ -55,6 +55,7 @@
/* USER CODE END 0 */
/* External variables --------------------------------------------------------*/
+extern DMA_HandleTypeDef hdma_lpuart_rx;
extern UART_HandleTypeDef hlpuart1;
extern TIM_HandleTypeDef htim6;
@@ -174,6 +175,20 @@ void TIM6_DAC_IRQHandler(void)
/* USER CODE END TIM6_DAC_IRQn 1 */
}
+/**
+ * @brief This function handles DMA2 channel7 global interrupt.
+ */
+void DMA2_Channel7_IRQHandler(void)
+{
+ /* USER CODE BEGIN DMA2_Channel7_IRQn 0 */
+
+ /* USER CODE END DMA2_Channel7_IRQn 0 */
+ HAL_DMA_IRQHandler(&hdma_lpuart_rx);
+ /* USER CODE BEGIN DMA2_Channel7_IRQn 1 */
+
+ /* USER CODE END DMA2_Channel7_IRQn 1 */
+}
+
/**
* @brief This function handles LPUART1 global interrupt.
*/
diff --git a/stm32l4a6zg-f0x.at1.ioc b/stm32l4a6zg-f0x.at1.ioc
index e42a43f..88820fa 100644
--- a/stm32l4a6zg-f0x.at1.ioc
+++ b/stm32l4a6zg-f0x.at1.ioc
@@ -1,8 +1,19 @@
#MicroXplorer Configuration settings - do not modify
-FREERTOS.BinarySemaphores01=si5351,Dynamic,NULL
+Dma.LPUART_RX.0.Direction=DMA_PERIPH_TO_MEMORY
+Dma.LPUART_RX.0.Instance=DMA2_Channel7
+Dma.LPUART_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE
+Dma.LPUART_RX.0.MemInc=DMA_MINC_ENABLE
+Dma.LPUART_RX.0.Mode=DMA_NORMAL
+Dma.LPUART_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
+Dma.LPUART_RX.0.PeriphInc=DMA_PINC_DISABLE
+Dma.LPUART_RX.0.Priority=DMA_PRIORITY_LOW
+Dma.LPUART_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
+Dma.Request0=LPUART_RX
+Dma.RequestsNb=1
+FREERTOS.BinarySemaphores01=si5351,Dynamic,NULL;command,Dynamic,NULL
FREERTOS.FootprintOK=true
FREERTOS.IPParameters=Tasks01,configUSE_NEWLIB_REENTRANT,FootprintOK,configTOTAL_HEAP_SIZE,BinarySemaphores01
-FREERTOS.Tasks01=defaultTask,24,128,StartDefaultTask,Default,NULL,Dynamic,NULL,NULL;terminalTask,16,128,start_terminal_task,Default,NULL,Dynamic,NULL,NULL;morseTask,24,128,start_morse_task,Default,si5351_inst,Dynamic,NULL,NULL;clk2Task,40,128,start_clk2_task,Default,si5351_inst,Dynamic,NULL,NULL
+FREERTOS.Tasks01=defaultTask,24,128,StartDefaultTask,Default,NULL,Dynamic,NULL,NULL;terminalTask,24,256,start_terminal_task,Default,NULL,Dynamic,NULL,NULL;morseTask,24,128,start_morse_task,Default,si5351_inst,Dynamic,NULL,NULL;clk2Task,40,128,start_clk2_task,Default,si5351_inst,Dynamic,NULL,NULL
FREERTOS.configTOTAL_HEAP_SIZE=30000
FREERTOS.configUSE_NEWLIB_REENTRANT=1
File.Version=6
@@ -15,13 +26,13 @@ I2C1.Timing=0x00000001
KeepUserPlacement=false
LPUART1.AutoBaudRateEnableParam=UART_ADVFEATURE_AUTOBAUDRATE_DISABLE
LPUART1.BaudRate=115200
-LPUART1.DMADisableonRxErrorParam=UART_ADVFEATURE_DMA_ENABLEONRXERROR
+LPUART1.DMADisableonRxErrorParam=UART_ADVFEATURE_DMA_DISABLEONRXERROR
LPUART1.DataInvertParam=UART_ADVFEATURE_DATAINV_DISABLE
LPUART1.IPParameters=WordLength,Parity,StopBits,Mode,OneBitSampling,AutoBaudRateEnableParam,TxPinLevelInvertParam,RxPinLevelInvertParam,DataInvertParam,SwapParam,OverrunDisableParam,DMADisableonRxErrorParam,MSBFirstParam,BaudRate
LPUART1.MSBFirstParam=UART_ADVFEATURE_MSBFIRST_DISABLE
LPUART1.Mode=UART_MODE_TX_RX
LPUART1.OneBitSampling=UART_ONE_BIT_SAMPLE_DISABLE
-LPUART1.OverrunDisableParam=UART_ADVFEATURE_OVERRUN_ENABLE
+LPUART1.OverrunDisableParam=UART_ADVFEATURE_OVERRUN_DISABLE
LPUART1.Parity=UART_PARITY_NONE
LPUART1.RxPinLevelInvertParam=UART_ADVFEATURE_RXINV_DISABLE
LPUART1.StopBits=UART_STOPBITS_1
@@ -30,14 +41,15 @@ LPUART1.TxPinLevelInvertParam=UART_ADVFEATURE_TXINV_DISABLE
LPUART1.WordLength=UART_WORDLENGTH_8B
Mcu.CPN=STM32L4A6ZGT6
Mcu.Family=STM32L4
-Mcu.IP0=FREERTOS
-Mcu.IP1=I2C1
-Mcu.IP2=LPUART1
-Mcu.IP3=NVIC
-Mcu.IP4=RCC
-Mcu.IP5=RTC
-Mcu.IP6=SYS
-Mcu.IPNb=7
+Mcu.IP0=DMA
+Mcu.IP1=FREERTOS
+Mcu.IP2=I2C1
+Mcu.IP3=LPUART1
+Mcu.IP4=NVIC
+Mcu.IP5=RCC
+Mcu.IP6=RTC
+Mcu.IP7=SYS
+Mcu.IPNb=8
Mcu.Name=STM32L4A6ZGTx
Mcu.Package=LQFP144
Mcu.Pin0=PE2
@@ -156,26 +168,27 @@ Mcu.PinsNb=112
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32L4A6ZGTx
-MxCube.Version=6.5.0
-MxDb.Version=DB.6.0.50
-NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false\:true
-NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false\:true
+MxCube.Version=6.6.1
+MxDb.Version=DB.6.0.60
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false\:false
+NVIC.DMA2_Channel7_IRQn=true\:5\:0\:false\:false\:true\:true\:false\:true\:true
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false\:false
NVIC.ForceEnableDMAVector=true
-NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false\:true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false\:false
NVIC.LPUART1_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true\:true
-NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false\:true
-NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false\:true
-NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true\:true\:false\:true
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false\:false
+NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true\:true\:false\:false
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
-NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:true\:false\:true
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:true\:false\:false
NVIC.SavedPendsvIrqHandlerGenerated=true
NVIC.SavedSvcallIrqHandlerGenerated=true
NVIC.SavedSystickIrqHandlerGenerated=true
-NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:false\:true\:true\:true\:true
+NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:false\:true\:true\:true\:false
NVIC.TIM6_DAC_IRQn=true\:15\:0\:false\:false\:true\:false\:false\:true\:true
NVIC.TimeBase=TIM6_DAC_IRQn
NVIC.TimeBaseIP=TIM6
-NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false\:true
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false\:false
PA0.Signal=GPIO_Analog
PA1.Signal=GPIO_Analog
PA10.GPIOParameters=GPIO_Label
@@ -418,7 +431,7 @@ ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=STM32CubeIDE
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=true
-ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_LPUART1_UART_Init-LPUART1-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true,5-MX_I2C1_Init-I2C1-false-HAL-true
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_I2C1_Init-I2C1-false-HAL-true,5-MX_LPUART1_UART_Init-LPUART1-false-HAL-true,6-MX_RTC_Init-RTC-false-HAL-true
RCC.ADCFreq_Value=48000000
RCC.AHBCLKDivider=RCC_SYSCLK_DIV8
RCC.AHBFreq_Value=5916666.666666667
@@ -496,5 +509,4 @@ VP_RTC_VS_RTC_Calendar.Signal=RTC_VS_RTC_Calendar
VP_SYS_VS_tim6.Mode=TIM6
VP_SYS_VS_tim6.Signal=SYS_VS_tim6
board=NUCLEO-L4A6ZG
-boardIOC=true
isbadioc=false