thesis/f0x.at1
1
0
Fork 0
Code Issues Pull-Requests Projekte Releases Wiki Aktivität

ringbuffer, helper, HAL_Driver (LL)

Quellcode durchsuchen
Dieser Commit ist enthalten in:
Thomas Kuschel
2022-07-15 12:44:08 +02:00
Ursprung 32162a2ec4
Commit cf43818890
21 geänderte Dateien mit 36069 neuen und 0 gelöschten Zeilen
Patch-Datei herunterladen Vergleichs-Datei herunterladen Alle Dateien ausklappen Alle Dateien einklappen
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_bus.h
+1954
Datei anzeigen
Datei-Diff unterdrückt, da er zu groß ist Diff laden
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_cortex.h
+637
Datei anzeigen
@@ -0,0 +1,637 @@
/**
******************************************************************************
* @file stm32l4xx_ll_cortex.h
* @author MCD Application Team
* @brief Header file of CORTEX LL module.
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The LL CORTEX driver contains a set of generic APIs that can be
used by user:
(+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick
functions
(+) Low power mode configuration (SCB register of Cortex-MCU)
(+) MPU API to configure and enable regions
(+) API to access to MCU info (CPUID register)
(+) API to enable fault handler (SHCSR accesses)
@endverbatim
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file in
* the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32L4xx_LL_CORTEX_H
#define STM32L4xx_LL_CORTEX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx.h"
/** @addtogroup STM32L4xx_LL_Driver
* @{
*/
/** @defgroup CORTEX_LL CORTEX
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants
* @{
*/
/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source
* @{
*/
#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/
#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type
* @{
*/
#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */
#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */
#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */
/**
* @}
*/
#if __MPU_PRESENT
/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control
* @{
*/
#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */
#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */
#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */
#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_REGION MPU Region Number
* @{
*/
#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */
#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */
#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */
#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */
#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */
#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */
#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */
#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size
* @{
*/
#define LL_MPU_REGION_SIZE_32B (0x04U << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_64B (0x05U << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_128B (0x06U << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges
* @{
*/
#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/
#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/
#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */
#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */
#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/
#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level
* @{
*/
#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */
#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */
#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */
#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access
* @{
*/
#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */
#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access
* @{
*/
#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */
#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access
* @{
*/
#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */
#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access
* @{
*/
#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */
#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */
/**
* @}
*/
#endif /* __MPU_PRESENT */
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions
* @{
*/
/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK
* @{
*/
/**
* @brief This function checks if the Systick counter flag is active or not.
* @note It can be used in timeout function on application side.
* @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void)
{
return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk));
}
/**
* @brief Configures the SysTick clock source
* @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource
* @param Source This parameter can be one of the following values:
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
* @retval None
*/
__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source)
{
if (Source == LL_SYSTICK_CLKSOURCE_HCLK)
{
SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
}
else
{
CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
}
}
/**
* @brief Get the SysTick clock source
* @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
*/
__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void)
{
return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
}
/**
* @brief Enable SysTick exception request
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT
* @retval None
*/
__STATIC_INLINE void LL_SYSTICK_EnableIT(void)
{
SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
}
/**
* @brief Disable SysTick exception request
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT
* @retval None
*/
__STATIC_INLINE void LL_SYSTICK_DisableIT(void)
{
CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
}
/**
* @brief Checks if the SYSTICK interrupt is enabled or disabled.
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void)
{
return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk));
}
/**
* @}
*/
/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE
* @{
*/
/**
* @brief Processor uses sleep as its low power mode
* @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableSleep(void)
{
/* Clear SLEEPDEEP bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
}
/**
* @brief Processor uses deep sleep as its low power mode
* @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableDeepSleep(void)
{
/* Set SLEEPDEEP bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
}
/**
* @brief Configures sleep-on-exit when returning from Handler mode to Thread mode.
* @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an
* empty main application.
* @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void)
{
/* Set SLEEPONEXIT bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
}
/**
* @brief Do not sleep when returning to Thread mode.
* @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit
* @retval None
*/
__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void)
{
/* Clear SLEEPONEXIT bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
}
/**
* @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the
* processor.
* @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableEventOnPend(void)
{
/* Set SEVEONPEND bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
}
/**
* @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are
* excluded
* @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend
* @retval None
*/
__STATIC_INLINE void LL_LPM_DisableEventOnPend(void)
{
/* Clear SEVEONPEND bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
}
/**
* @}
*/
/** @defgroup CORTEX_LL_EF_HANDLER HANDLER
* @{
*/
/**
* @brief Enable a fault in System handler control register (SHCSR)
* @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault
* @param Fault This parameter can be a combination of the following values:
* @arg @ref LL_HANDLER_FAULT_USG
* @arg @ref LL_HANDLER_FAULT_BUS
* @arg @ref LL_HANDLER_FAULT_MEM
* @retval None
*/
__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault)
{
/* Enable the system handler fault */
SET_BIT(SCB->SHCSR, Fault);
}
/**
* @brief Disable a fault in System handler control register (SHCSR)
* @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault
* @param Fault This parameter can be a combination of the following values:
* @arg @ref LL_HANDLER_FAULT_USG
* @arg @ref LL_HANDLER_FAULT_BUS
* @arg @ref LL_HANDLER_FAULT_MEM
* @retval None
*/
__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault)
{
/* Disable the system handler fault */
CLEAR_BIT(SCB->SHCSR, Fault);
}
/**
* @}
*/
/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO
* @{
*/
/**
* @brief Get Implementer code
* @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer
* @retval Value should be equal to 0x41 for ARM
*/
__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos);
}
/**
* @brief Get Variant number (The r value in the rnpn product revision identifier)
* @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant
* @retval Value between 0 and 255 (0x0: revision 0)
*/
__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos);
}
/**
* @brief Get Constant number
* @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant
* @retval Value should be equal to 0xF for Cortex-M4 devices
*/
__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos);
}
/**
* @brief Get Part number
* @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo
* @retval Value should be equal to 0xC24 for Cortex-M4
*/
__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos);
}
/**
* @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release)
* @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision
* @retval Value between 0 and 255 (0x1: patch 1)
*/
__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos);
}
/**
* @}
*/
#if __MPU_PRESENT
/** @defgroup CORTEX_LL_EF_MPU MPU
* @{
*/
/**
* @brief Enable MPU with input options
* @rmtoll MPU_CTRL ENABLE LL_MPU_Enable
* @param Options This parameter can be one of the following values:
* @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE
* @arg @ref LL_MPU_CTRL_HARDFAULT_NMI
* @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT
* @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF
* @retval None
*/
__STATIC_INLINE void LL_MPU_Enable(uint32_t Options)
{
/* Enable the MPU*/
WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options));
/* Ensure MPU settings take effects */
__DSB();
/* Sequence instruction fetches using update settings */
__ISB();
}
/**
* @brief Disable MPU
* @rmtoll MPU_CTRL ENABLE LL_MPU_Disable
* @retval None
*/
__STATIC_INLINE void LL_MPU_Disable(void)
{
/* Make sure outstanding transfers are done */
__DMB();
/* Disable MPU*/
WRITE_REG(MPU->CTRL, 0U);
}
/**
* @brief Check if MPU is enabled or not
* @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void)
{
return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk));
}
/**
* @brief Enable a MPU region
* @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion
* @param Region This parameter can be one of the following values:
* @arg @ref LL_MPU_REGION_NUMBER0
* @arg @ref LL_MPU_REGION_NUMBER1
* @arg @ref LL_MPU_REGION_NUMBER2
* @arg @ref LL_MPU_REGION_NUMBER3
* @arg @ref LL_MPU_REGION_NUMBER4
* @arg @ref LL_MPU_REGION_NUMBER5
* @arg @ref LL_MPU_REGION_NUMBER6
* @arg @ref LL_MPU_REGION_NUMBER7
* @retval None
*/
__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region)
{
/* Set Region number */
WRITE_REG(MPU->RNR, Region);
/* Enable the MPU region */
SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
}
/**
* @brief Configure and enable a region
* @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n
* MPU_RBAR REGION LL_MPU_ConfigRegion\n
* MPU_RBAR ADDR LL_MPU_ConfigRegion\n
* MPU_RASR XN LL_MPU_ConfigRegion\n
* MPU_RASR AP LL_MPU_ConfigRegion\n
* MPU_RASR S LL_MPU_ConfigRegion\n
* MPU_RASR C LL_MPU_ConfigRegion\n
* MPU_RASR B LL_MPU_ConfigRegion\n
* MPU_RASR SIZE LL_MPU_ConfigRegion
* @param Region This parameter can be one of the following values:
* @arg @ref LL_MPU_REGION_NUMBER0
* @arg @ref LL_MPU_REGION_NUMBER1
* @arg @ref LL_MPU_REGION_NUMBER2
* @arg @ref LL_MPU_REGION_NUMBER3
* @arg @ref LL_MPU_REGION_NUMBER4
* @arg @ref LL_MPU_REGION_NUMBER5
* @arg @ref LL_MPU_REGION_NUMBER6
* @arg @ref LL_MPU_REGION_NUMBER7
* @param Address Value of region base address
* @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF
* @param Attributes This parameter can be a combination of the following values:
* @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B
* or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB
* or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB
* or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB
* or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB
* or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB
* @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS
* or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO
* @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4
* @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE
* @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE
* @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE
* @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE
* @retval None
*/
__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes)
{
/* Set Region number */
WRITE_REG(MPU->RNR, Region);
/* Set base address */
WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U));
/* Configure MPU */
WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | SubRegionDisable << MPU_RASR_SRD_Pos));
}
/**
* @brief Disable a region
* @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n
* MPU_RASR ENABLE LL_MPU_DisableRegion
* @param Region This parameter can be one of the following values:
* @arg @ref LL_MPU_REGION_NUMBER0
* @arg @ref LL_MPU_REGION_NUMBER1
* @arg @ref LL_MPU_REGION_NUMBER2
* @arg @ref LL_MPU_REGION_NUMBER3
* @arg @ref LL_MPU_REGION_NUMBER4
* @arg @ref LL_MPU_REGION_NUMBER5
* @arg @ref LL_MPU_REGION_NUMBER6
* @arg @ref LL_MPU_REGION_NUMBER7
* @retval None
*/
__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region)
{
/* Set Region number */
WRITE_REG(MPU->RNR, Region);
/* Disable the MPU region */
CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
}
/**
* @}
*/
#endif /* __MPU_PRESENT */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32L4xx_LL_CORTEX_H */
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_crs.h
+785
Datei anzeigen
@@ -0,0 +1,785 @@
/**
******************************************************************************
* @file stm32l4xx_ll_crs.h
* @author MCD Application Team
* @brief Header file of CRS LL module.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32L4xx_LL_CRS_H
#define STM32L4xx_LL_CRS_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx.h"
/** @addtogroup STM32L4xx_LL_Driver
* @{
*/
#if defined(CRS)
/** @defgroup CRS_LL CRS
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CRS_LL_Exported_Constants CRS Exported Constants
* @{
*/
/** @defgroup CRS_LL_EC_GET_FLAG Get Flags Defines
* @brief Flags defines which can be used with LL_CRS_ReadReg function
* @{
*/
#define LL_CRS_ISR_SYNCOKF CRS_ISR_SYNCOKF
#define LL_CRS_ISR_SYNCWARNF CRS_ISR_SYNCWARNF
#define LL_CRS_ISR_ERRF CRS_ISR_ERRF
#define LL_CRS_ISR_ESYNCF CRS_ISR_ESYNCF
#define LL_CRS_ISR_SYNCERR CRS_ISR_SYNCERR
#define LL_CRS_ISR_SYNCMISS CRS_ISR_SYNCMISS
#define LL_CRS_ISR_TRIMOVF CRS_ISR_TRIMOVF
/**
* @}
*/
/** @defgroup CRS_LL_EC_IT IT Defines
* @brief IT defines which can be used with LL_CRS_ReadReg and LL_CRS_WriteReg functions
* @{
*/
#define LL_CRS_CR_SYNCOKIE CRS_CR_SYNCOKIE
#define LL_CRS_CR_SYNCWARNIE CRS_CR_SYNCWARNIE
#define LL_CRS_CR_ERRIE CRS_CR_ERRIE
#define LL_CRS_CR_ESYNCIE CRS_CR_ESYNCIE
/**
* @}
*/
/** @defgroup CRS_LL_EC_SYNC_DIV Synchronization Signal Divider
* @{
*/
#define LL_CRS_SYNC_DIV_1 ((uint32_t)0x00U) /*!< Synchro Signal not divided (default) */
#define LL_CRS_SYNC_DIV_2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */
#define LL_CRS_SYNC_DIV_4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */
#define LL_CRS_SYNC_DIV_8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */
#define LL_CRS_SYNC_DIV_16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */
#define LL_CRS_SYNC_DIV_32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */
#define LL_CRS_SYNC_DIV_64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */
#define LL_CRS_SYNC_DIV_128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */
/**
* @}
*/
/** @defgroup CRS_LL_EC_SYNC_SOURCE Synchronization Signal Source
* @{
*/
#define LL_CRS_SYNC_SOURCE_GPIO ((uint32_t)0x00U) /*!< Synchro Signal source GPIO */
#define LL_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */
#define LL_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/
/**
* @}
*/
/** @defgroup CRS_LL_EC_SYNC_POLARITY Synchronization Signal Polarity
* @{
*/
#define LL_CRS_SYNC_POLARITY_RISING ((uint32_t)0x00U) /*!< Synchro Active on rising edge (default) */
#define LL_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */
/**
* @}
*/
/** @defgroup CRS_LL_EC_FREQERRORDIR Frequency Error Direction
* @{
*/
#define LL_CRS_FREQ_ERROR_DIR_UP ((uint32_t)0x00U) /*!< Upcounting direction, the actual frequency is above the target */
#define LL_CRS_FREQ_ERROR_DIR_DOWN ((uint32_t)CRS_ISR_FEDIR) /*!< Downcounting direction, the actual frequency is below the target */
/**
* @}
*/
/** @defgroup CRS_LL_EC_DEFAULTVALUES Default Values
* @{
*/
/**
* @brief Reset value of the RELOAD field
* @note The reset value of the RELOAD field corresponds to a target frequency of 48 MHz
* and a synchronization signal frequency of 1 kHz (SOF signal from USB)
*/
#define LL_CRS_RELOADVALUE_DEFAULT ((uint32_t)0xBB7FU)
/**
* @brief Reset value of Frequency error limit.
*/
#define LL_CRS_ERRORLIMIT_DEFAULT ((uint32_t)0x22U)
/**
* @brief Reset value of the HSI48 Calibration field
* @note The default value is 64 for STM32L412xx/L422xx, 32 otherwise, which corresponds
* to the middle of the trimming interval.
* The trimming step is around 67 kHz between two consecutive TRIM steps.
* A higher TRIM value corresponds to a higher output frequency
*/
#if defined (STM32L412xx) || defined (STM32L422xx)
#define LL_CRS_HSI48CALIBRATION_DEFAULT ((uint32_t)64U)
#else
#define LL_CRS_HSI48CALIBRATION_DEFAULT ((uint32_t)32U)
#endif
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup CRS_LL_Exported_Macros CRS Exported Macros
* @{
*/
/** @defgroup CRS_LL_EM_WRITE_READ Common Write and read registers Macros
* @{
*/
/**
* @brief Write a value in CRS register
* @param __INSTANCE__ CRS Instance
* @param __REG__ Register to be written
* @param __VALUE__ Value to be written in the register
* @retval None
*/
#define LL_CRS_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
/**
* @brief Read a value in CRS register
* @param __INSTANCE__ CRS Instance
* @param __REG__ Register to be read
* @retval Register value
*/
#define LL_CRS_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
/**
* @}
*/
/** @defgroup CRS_LL_EM_Exported_Macros_Calculate_Reload Exported_Macros_Calculate_Reload
* @{
*/
/**
* @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies
* @note The RELOAD value should be selected according to the ratio between
* the target frequency and the frequency of the synchronization source after
* prescaling. It is then decreased by one in order to reach the expected
* synchronization on the zero value. The formula is the following:
* RELOAD = (fTARGET / fSYNC) -1
* @param __FTARGET__ Target frequency (value in Hz)
* @param __FSYNC__ Synchronization signal frequency (value in Hz)
* @retval Reload value (in Hz)
*/
#define __LL_CRS_CALC_CALCULATE_RELOADVALUE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U)
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup CRS_LL_Exported_Functions CRS Exported Functions
* @{
*/
/** @defgroup CRS_LL_EF_Configuration Configuration
* @{
*/
/**
* @brief Enable Frequency error counter
* @note When this bit is set, the CRS_CFGR register is write-protected and cannot be modified
* @rmtoll CR CEN LL_CRS_EnableFreqErrorCounter
* @retval None
*/
__STATIC_INLINE void LL_CRS_EnableFreqErrorCounter(void)
{
SET_BIT(CRS->CR, CRS_CR_CEN);
}
/**
* @brief Disable Frequency error counter
* @rmtoll CR CEN LL_CRS_DisableFreqErrorCounter
* @retval None
*/
__STATIC_INLINE void LL_CRS_DisableFreqErrorCounter(void)
{
CLEAR_BIT(CRS->CR, CRS_CR_CEN);
}
/**
* @brief Check if Frequency error counter is enabled or not
* @rmtoll CR CEN LL_CRS_IsEnabledFreqErrorCounter
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsEnabledFreqErrorCounter(void)
{
return (READ_BIT(CRS->CR, CRS_CR_CEN) == (CRS_CR_CEN));
}
/**
* @brief Enable Automatic trimming counter
* @rmtoll CR AUTOTRIMEN LL_CRS_EnableAutoTrimming
* @retval None
*/
__STATIC_INLINE void LL_CRS_EnableAutoTrimming(void)
{
SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN);
}
/**
* @brief Disable Automatic trimming counter
* @rmtoll CR AUTOTRIMEN LL_CRS_DisableAutoTrimming
* @retval None
*/
__STATIC_INLINE void LL_CRS_DisableAutoTrimming(void)
{
CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN);
}
/**
* @brief Check if Automatic trimming is enabled or not
* @rmtoll CR AUTOTRIMEN LL_CRS_IsEnabledAutoTrimming
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsEnabledAutoTrimming(void)
{
return (READ_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) == (CRS_CR_AUTOTRIMEN));
}
/**
* @brief Set HSI48 oscillator smooth trimming
* @note When the AUTOTRIMEN bit is set, this field is controlled by hardware and is read-only
* @rmtoll CR TRIM LL_CRS_SetHSI48SmoothTrimming
* @param Value a number between Min_Data = 0 and Max_Data = 127 for STM32L412xx/L422xx or 63 otherwise
* @note Default value can be set thanks to @ref LL_CRS_HSI48CALIBRATION_DEFAULT
* @retval None
*/
__STATIC_INLINE void LL_CRS_SetHSI48SmoothTrimming(uint32_t Value)
{
MODIFY_REG(CRS->CR, CRS_CR_TRIM, Value << CRS_CR_TRIM_Pos);
}
/**
* @brief Get HSI48 oscillator smooth trimming
* @rmtoll CR TRIM LL_CRS_GetHSI48SmoothTrimming
* @retval a number between Min_Data = 0 and Max_Data = 127 for STM32L412xx/L422xx or 63 otherwise
*/
__STATIC_INLINE uint32_t LL_CRS_GetHSI48SmoothTrimming(void)
{
return (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos);
}
/**
* @brief Set counter reload value
* @rmtoll CFGR RELOAD LL_CRS_SetReloadCounter
* @param Value a number between Min_Data = 0 and Max_Data = 0xFFFF
* @note Default value can be set thanks to @ref LL_CRS_RELOADVALUE_DEFAULT
* Otherwise it can be calculated in using macro @ref __LL_CRS_CALC_CALCULATE_RELOADVALUE (_FTARGET_, _FSYNC_)
* @retval None
*/
__STATIC_INLINE void LL_CRS_SetReloadCounter(uint32_t Value)
{
MODIFY_REG(CRS->CFGR, CRS_CFGR_RELOAD, Value);
}
/**
* @brief Get counter reload value
* @rmtoll CFGR RELOAD LL_CRS_GetReloadCounter
* @retval a number between Min_Data = 0 and Max_Data = 0xFFFF
*/
__STATIC_INLINE uint32_t LL_CRS_GetReloadCounter(void)
{
return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD));
}
/**
* @brief Set frequency error limit
* @rmtoll CFGR FELIM LL_CRS_SetFreqErrorLimit
* @param Value a number between Min_Data = 0 and Max_Data = 255
* @note Default value can be set thanks to @ref LL_CRS_ERRORLIMIT_DEFAULT
* @retval None
*/
__STATIC_INLINE void LL_CRS_SetFreqErrorLimit(uint32_t Value)
{
MODIFY_REG(CRS->CFGR, CRS_CFGR_FELIM, Value << CRS_CFGR_FELIM_Pos);
}
/**
* @brief Get frequency error limit
* @rmtoll CFGR FELIM LL_CRS_GetFreqErrorLimit
* @retval A number between Min_Data = 0 and Max_Data = 255
*/
__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorLimit(void)
{
return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_FELIM) >> CRS_CFGR_FELIM_Pos);
}
/**
* @brief Set division factor for SYNC signal
* @rmtoll CFGR SYNCDIV LL_CRS_SetSyncDivider
* @param Divider This parameter can be one of the following values:
* @arg @ref LL_CRS_SYNC_DIV_1
* @arg @ref LL_CRS_SYNC_DIV_2
* @arg @ref LL_CRS_SYNC_DIV_4
* @arg @ref LL_CRS_SYNC_DIV_8
* @arg @ref LL_CRS_SYNC_DIV_16
* @arg @ref LL_CRS_SYNC_DIV_32
* @arg @ref LL_CRS_SYNC_DIV_64
* @arg @ref LL_CRS_SYNC_DIV_128
* @retval None
*/
__STATIC_INLINE void LL_CRS_SetSyncDivider(uint32_t Divider)
{
MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCDIV, Divider);
}
/**
* @brief Get division factor for SYNC signal
* @rmtoll CFGR SYNCDIV LL_CRS_GetSyncDivider
* @retval Returned value can be one of the following values:
* @arg @ref LL_CRS_SYNC_DIV_1
* @arg @ref LL_CRS_SYNC_DIV_2
* @arg @ref LL_CRS_SYNC_DIV_4
* @arg @ref LL_CRS_SYNC_DIV_8
* @arg @ref LL_CRS_SYNC_DIV_16
* @arg @ref LL_CRS_SYNC_DIV_32
* @arg @ref LL_CRS_SYNC_DIV_64
* @arg @ref LL_CRS_SYNC_DIV_128
*/
__STATIC_INLINE uint32_t LL_CRS_GetSyncDivider(void)
{
return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCDIV));
}
/**
* @brief Set SYNC signal source
* @rmtoll CFGR SYNCSRC LL_CRS_SetSyncSignalSource
* @param Source This parameter can be one of the following values:
* @arg @ref LL_CRS_SYNC_SOURCE_GPIO
* @arg @ref LL_CRS_SYNC_SOURCE_LSE
* @arg @ref LL_CRS_SYNC_SOURCE_USB
* @retval None
*/
__STATIC_INLINE void LL_CRS_SetSyncSignalSource(uint32_t Source)
{
MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCSRC, Source);
}
/**
* @brief Get SYNC signal source
* @rmtoll CFGR SYNCSRC LL_CRS_GetSyncSignalSource
* @retval Returned value can be one of the following values:
* @arg @ref LL_CRS_SYNC_SOURCE_GPIO
* @arg @ref LL_CRS_SYNC_SOURCE_LSE
* @arg @ref LL_CRS_SYNC_SOURCE_USB
*/
__STATIC_INLINE uint32_t LL_CRS_GetSyncSignalSource(void)
{
return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCSRC));
}
/**
* @brief Set input polarity for the SYNC signal source
* @rmtoll CFGR SYNCPOL LL_CRS_SetSyncPolarity
* @param Polarity This parameter can be one of the following values:
* @arg @ref LL_CRS_SYNC_POLARITY_RISING
* @arg @ref LL_CRS_SYNC_POLARITY_FALLING
* @retval None
*/
__STATIC_INLINE void LL_CRS_SetSyncPolarity(uint32_t Polarity)
{
MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCPOL, Polarity);
}
/**
* @brief Get input polarity for the SYNC signal source
* @rmtoll CFGR SYNCPOL LL_CRS_GetSyncPolarity
* @retval Returned value can be one of the following values:
* @arg @ref LL_CRS_SYNC_POLARITY_RISING
* @arg @ref LL_CRS_SYNC_POLARITY_FALLING
*/
__STATIC_INLINE uint32_t LL_CRS_GetSyncPolarity(void)
{
return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCPOL));
}
/**
* @brief Configure CRS for the synchronization
* @rmtoll CR TRIM LL_CRS_ConfigSynchronization\n
* CFGR RELOAD LL_CRS_ConfigSynchronization\n
* CFGR FELIM LL_CRS_ConfigSynchronization\n
* CFGR SYNCDIV LL_CRS_ConfigSynchronization\n
* CFGR SYNCSRC LL_CRS_ConfigSynchronization\n
* CFGR SYNCPOL LL_CRS_ConfigSynchronization
* @param HSI48CalibrationValue a number between Min_Data = 0 and Max_Data = 127 for STM32L412xx/L422xx or 63 otherwise
* @param ErrorLimitValue a number between Min_Data = 0 and Max_Data = 0xFFFF
* @param ReloadValue a number between Min_Data = 0 and Max_Data = 255
* @param Settings This parameter can be a combination of the following values:
* @arg @ref LL_CRS_SYNC_DIV_1 or @ref LL_CRS_SYNC_DIV_2 or @ref LL_CRS_SYNC_DIV_4 or @ref LL_CRS_SYNC_DIV_8
* or @ref LL_CRS_SYNC_DIV_16 or @ref LL_CRS_SYNC_DIV_32 or @ref LL_CRS_SYNC_DIV_64 or @ref LL_CRS_SYNC_DIV_128
* @arg @ref LL_CRS_SYNC_SOURCE_GPIO or @ref LL_CRS_SYNC_SOURCE_LSE or @ref LL_CRS_SYNC_SOURCE_USB
* @arg @ref LL_CRS_SYNC_POLARITY_RISING or @ref LL_CRS_SYNC_POLARITY_FALLING
* @retval None
*/
__STATIC_INLINE void LL_CRS_ConfigSynchronization(uint32_t HSI48CalibrationValue, uint32_t ErrorLimitValue, uint32_t ReloadValue, uint32_t Settings)
{
MODIFY_REG(CRS->CR, CRS_CR_TRIM, HSI48CalibrationValue);
MODIFY_REG(CRS->CFGR,
CRS_CFGR_RELOAD | CRS_CFGR_FELIM | CRS_CFGR_SYNCDIV | CRS_CFGR_SYNCSRC | CRS_CFGR_SYNCPOL,
ReloadValue | (ErrorLimitValue << CRS_CFGR_FELIM_Pos) | Settings);
}
/**
* @}
*/
/** @defgroup CRS_LL_EF_CRS_Management CRS_Management
* @{
*/
/**
* @brief Generate software SYNC event
* @rmtoll CR SWSYNC LL_CRS_GenerateEvent_SWSYNC
* @retval None
*/
__STATIC_INLINE void LL_CRS_GenerateEvent_SWSYNC(void)
{
SET_BIT(CRS->CR, CRS_CR_SWSYNC);
}
/**
* @brief Get the frequency error direction latched in the time of the last
* SYNC event
* @rmtoll ISR FEDIR LL_CRS_GetFreqErrorDirection
* @retval Returned value can be one of the following values:
* @arg @ref LL_CRS_FREQ_ERROR_DIR_UP
* @arg @ref LL_CRS_FREQ_ERROR_DIR_DOWN
*/
__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorDirection(void)
{
return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR));
}
/**
* @brief Get the frequency error counter value latched in the time of the last SYNC event
* @rmtoll ISR FECAP LL_CRS_GetFreqErrorCapture
* @retval A number between Min_Data = 0x0000 and Max_Data = 0xFFFF
*/
__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorCapture(void)
{
return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos);
}
/**
* @}
*/
/** @defgroup CRS_LL_EF_FLAG_Management FLAG_Management
* @{
*/
/**
* @brief Check if SYNC event OK signal occurred or not
* @rmtoll ISR SYNCOKF LL_CRS_IsActiveFlag_SYNCOK
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCOK(void)
{
return (READ_BIT(CRS->ISR, CRS_ISR_SYNCOKF) == (CRS_ISR_SYNCOKF));
}
/**
* @brief Check if SYNC warning signal occurred or not
* @rmtoll ISR SYNCWARNF LL_CRS_IsActiveFlag_SYNCWARN
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCWARN(void)
{
return (READ_BIT(CRS->ISR, CRS_ISR_SYNCWARNF) == (CRS_ISR_SYNCWARNF));
}
/**
* @brief Check if Synchronization or trimming error signal occurred or not
* @rmtoll ISR ERRF LL_CRS_IsActiveFlag_ERR
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ERR(void)
{
return (READ_BIT(CRS->ISR, CRS_ISR_ERRF) == (CRS_ISR_ERRF));
}
/**
* @brief Check if Expected SYNC signal occurred or not
* @rmtoll ISR ESYNCF LL_CRS_IsActiveFlag_ESYNC
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ESYNC(void)
{
return (READ_BIT(CRS->ISR, CRS_ISR_ESYNCF) == (CRS_ISR_ESYNCF));
}
/**
* @brief Check if SYNC error signal occurred or not
* @rmtoll ISR SYNCERR LL_CRS_IsActiveFlag_SYNCERR
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCERR(void)
{
return (READ_BIT(CRS->ISR, CRS_ISR_SYNCERR) == (CRS_ISR_SYNCERR));
}
/**
* @brief Check if SYNC missed error signal occurred or not
* @rmtoll ISR SYNCMISS LL_CRS_IsActiveFlag_SYNCMISS
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCMISS(void)
{
return (READ_BIT(CRS->ISR, CRS_ISR_SYNCMISS) == (CRS_ISR_SYNCMISS));
}
/**
* @brief Check if Trimming overflow or underflow occurred or not
* @rmtoll ISR TRIMOVF LL_CRS_IsActiveFlag_TRIMOVF
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_TRIMOVF(void)
{
return (READ_BIT(CRS->ISR, CRS_ISR_TRIMOVF) == (CRS_ISR_TRIMOVF));
}
/**
* @brief Clear the SYNC event OK flag
* @rmtoll ICR SYNCOKC LL_CRS_ClearFlag_SYNCOK
* @retval None
*/
__STATIC_INLINE void LL_CRS_ClearFlag_SYNCOK(void)
{
WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC);
}
/**
* @brief Clear the SYNC warning flag
* @rmtoll ICR SYNCWARNC LL_CRS_ClearFlag_SYNCWARN
* @retval None
*/
__STATIC_INLINE void LL_CRS_ClearFlag_SYNCWARN(void)
{
WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC);
}
/**
* @brief Clear TRIMOVF, SYNCMISS and SYNCERR bits and consequently also
* the ERR flag
* @rmtoll ICR ERRC LL_CRS_ClearFlag_ERR
* @retval None
*/
__STATIC_INLINE void LL_CRS_ClearFlag_ERR(void)
{
WRITE_REG(CRS->ICR, CRS_ICR_ERRC);
}
/**
* @brief Clear Expected SYNC flag
* @rmtoll ICR ESYNCC LL_CRS_ClearFlag_ESYNC
* @retval None
*/
__STATIC_INLINE void LL_CRS_ClearFlag_ESYNC(void)
{
WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC);
}
/**
* @}
*/
/** @defgroup CRS_LL_EF_IT_Management IT_Management
* @{
*/
/**
* @brief Enable SYNC event OK interrupt
* @rmtoll CR SYNCOKIE LL_CRS_EnableIT_SYNCOK
* @retval None
*/
__STATIC_INLINE void LL_CRS_EnableIT_SYNCOK(void)
{
SET_BIT(CRS->CR, CRS_CR_SYNCOKIE);
}
/**
* @brief Disable SYNC event OK interrupt
* @rmtoll CR SYNCOKIE LL_CRS_DisableIT_SYNCOK
* @retval None
*/
__STATIC_INLINE void LL_CRS_DisableIT_SYNCOK(void)
{
CLEAR_BIT(CRS->CR, CRS_CR_SYNCOKIE);
}
/**
* @brief Check if SYNC event OK interrupt is enabled or not
* @rmtoll CR SYNCOKIE LL_CRS_IsEnabledIT_SYNCOK
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCOK(void)
{
return (READ_BIT(CRS->CR, CRS_CR_SYNCOKIE) == (CRS_CR_SYNCOKIE));
}
/**
* @brief Enable SYNC warning interrupt
* @rmtoll CR SYNCWARNIE LL_CRS_EnableIT_SYNCWARN
* @retval None
*/
__STATIC_INLINE void LL_CRS_EnableIT_SYNCWARN(void)
{
SET_BIT(CRS->CR, CRS_CR_SYNCWARNIE);
}
/**
* @brief Disable SYNC warning interrupt
* @rmtoll CR SYNCWARNIE LL_CRS_DisableIT_SYNCWARN
* @retval None
*/
__STATIC_INLINE void LL_CRS_DisableIT_SYNCWARN(void)
{
CLEAR_BIT(CRS->CR, CRS_CR_SYNCWARNIE);
}
/**
* @brief Check if SYNC warning interrupt is enabled or not
* @rmtoll CR SYNCWARNIE LL_CRS_IsEnabledIT_SYNCWARN
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCWARN(void)
{
return (READ_BIT(CRS->CR, CRS_CR_SYNCWARNIE) == (CRS_CR_SYNCWARNIE));
}
/**
* @brief Enable Synchronization or trimming error interrupt
* @rmtoll CR ERRIE LL_CRS_EnableIT_ERR
* @retval None
*/
__STATIC_INLINE void LL_CRS_EnableIT_ERR(void)
{
SET_BIT(CRS->CR, CRS_CR_ERRIE);
}
/**
* @brief Disable Synchronization or trimming error interrupt
* @rmtoll CR ERRIE LL_CRS_DisableIT_ERR
* @retval None
*/
__STATIC_INLINE void LL_CRS_DisableIT_ERR(void)
{
CLEAR_BIT(CRS->CR, CRS_CR_ERRIE);
}
/**
* @brief Check if Synchronization or trimming error interrupt is enabled or not
* @rmtoll CR ERRIE LL_CRS_IsEnabledIT_ERR
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ERR(void)
{
return (READ_BIT(CRS->CR, CRS_CR_ERRIE) == (CRS_CR_ERRIE));
}
/**
* @brief Enable Expected SYNC interrupt
* @rmtoll CR ESYNCIE LL_CRS_EnableIT_ESYNC
* @retval None
*/
__STATIC_INLINE void LL_CRS_EnableIT_ESYNC(void)
{
SET_BIT(CRS->CR, CRS_CR_ESYNCIE);
}
/**
* @brief Disable Expected SYNC interrupt
* @rmtoll CR ESYNCIE LL_CRS_DisableIT_ESYNC
* @retval None
*/
__STATIC_INLINE void LL_CRS_DisableIT_ESYNC(void)
{
CLEAR_BIT(CRS->CR, CRS_CR_ESYNCIE);
}
/**
* @brief Check if Expected SYNC interrupt is enabled or not
* @rmtoll CR ESYNCIE LL_CRS_IsEnabledIT_ESYNC
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ESYNC(void)
{
return (READ_BIT(CRS->CR, CRS_CR_ESYNCIE) == (CRS_CR_ESYNCIE));
}
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup CRS_LL_EF_Init Initialization and de-initialization functions
* @{
*/
ErrorStatus LL_CRS_DeInit(void);
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/**
* @}
*/
/**
* @}
*/
#endif /* defined(CRS) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32L4xx_LL_CRS_H */
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_dma.h
+2430
Datei anzeigen
Datei-Diff unterdrückt, da er zu groß ist Diff laden
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_dmamux.h
+1981
Datei anzeigen
Datei-Diff unterdrückt, da er zu groß ist Diff laden
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_exti.h
+1359
Datei anzeigen
Datei-Diff unterdrückt, da er zu groß ist Diff laden
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_gpio.h
+1056
Datei anzeigen
Datei-Diff unterdrückt, da er zu groß ist Diff laden
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_i2c.h
+2272
Datei anzeigen
Datei-Diff unterdrückt, da er zu groß ist Diff laden
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_lpuart.h
+2881
Datei anzeigen
Datei-Diff unterdrückt, da er zu groß ist Diff laden
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_pwr.h
+1675
Datei anzeigen
Datei-Diff unterdrückt, da er zu groß ist Diff laden
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_rcc.h
+6233
Datei anzeigen
Datei-Diff unterdrückt, da er zu groß ist Diff laden
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_rtc.h
+5574
Datei anzeigen
Datei-Diff unterdrückt, da er zu groß ist Diff laden
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_system.h
+1627
Datei anzeigen
Datei-Diff unterdrückt, da er zu groß ist Diff laden
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_usart.h
+4701
Datei anzeigen
Datei-Diff unterdrückt, da er zu groß ist Diff laden
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_utils.h
+329
Datei anzeigen
@@ -0,0 +1,329 @@
/**
******************************************************************************
* @file stm32l4xx_ll_utils.h
* @author MCD Application Team
* @brief Header file of UTILS LL module.
*
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The LL UTILS driver contains a set of generic APIs that can be
used by user:
(+) Device electronic signature
(+) Timing functions
(+) PLL configuration functions
@endverbatim
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32L4xx_LL_UTILS_H
#define STM32L4xx_LL_UTILS_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx.h"
/** @addtogroup STM32L4xx_LL_Driver
* @{
*/
/** @defgroup UTILS_LL UTILS
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants
* @{
*/
/* Max delay can be used in LL_mDelay */
#define LL_MAX_DELAY 0xFFFFFFFFU
/**
* @brief Unique device ID register base address
*/
#define UID_BASE_ADDRESS UID_BASE
/**
* @brief Flash size data register base address
*/
#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE
/**
* @brief Package data register base address
*/
#define PACKAGE_BASE_ADDRESS PACKAGE_BASE
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros
* @{
*/
/**
* @}
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures
* @{
*/
/**
* @brief UTILS PLL structure definition
*/
typedef struct
{
uint32_t PLLM; /*!< Division factor for PLL VCO input clock.
This parameter can be a value of @ref RCC_LL_EC_PLLM_DIV
This feature can be modified afterwards using unitary function
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock.
This parameter must be a number between Min_Data = 8 and Max_Data = 86
This feature can be modified afterwards using unitary function
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
uint32_t PLLR; /*!< Division for the main system clock.
This parameter can be a value of @ref RCC_LL_EC_PLLR_DIV
This feature can be modified afterwards using unitary function
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
} LL_UTILS_PLLInitTypeDef;
/**
* @brief UTILS System, AHB and APB buses clock configuration structure definition
*/
typedef struct
{
uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV
This feature can be modified afterwards using unitary function
@ref LL_RCC_SetAHBPrescaler(). */
uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
This parameter can be a value of @ref RCC_LL_EC_APB1_DIV
This feature can be modified afterwards using unitary function
@ref LL_RCC_SetAPB1Prescaler(). */
uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
This parameter can be a value of @ref RCC_LL_EC_APB2_DIV
This feature can be modified afterwards using unitary function
@ref LL_RCC_SetAPB2Prescaler(). */
} LL_UTILS_ClkInitTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants
* @{
*/
/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation
* @{
*/
#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */
#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */
/**
* @}
*/
/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE
* @{
*/
#define LL_UTILS_PACKAGETYPE_LQFP64 0x00000000U /*!< LQFP64 package type */
#define LL_UTILS_PACKAGETYPE_WLCSP64 0x00000001U /*!< WLCSP64 package type */
#define LL_UTILS_PACKAGETYPE_LQFP100 0x00000002U /*!< LQFP100 package type */
#define LL_UTILS_PACKAGETYPE_BGA132 0x00000003U /*!< BGA132 package type */
#define LL_UTILS_PACKAGETYPE_LQFP144_CSP72 0x00000004U /*!< LQFP144, WLCSP81 or WLCSP72 package type */
#define LL_UTILS_PACKAGETYPE_UFQFPN32 0x00000008U /*!< UFQFPN32 package type */
#define LL_UTILS_PACKAGETYPE_UFQFPN48 0x0000000AU /*!< UFQFPN48 package type */
#define LL_UTILS_PACKAGETYPE_LQFP48 0x0000000BU /*!< LQFP48 package type */
#define LL_UTILS_PACKAGETYPE_WLCSP49 0x0000000CU /*!< WLCSP49 package type */
#define LL_UTILS_PACKAGETYPE_UFBGA64 0x0000000DU /*!< UFBGA64 package type */
#define LL_UTILS_PACKAGETYPE_UFBGA100 0x0000000EU /*!< UFBGA100 package type */
#define LL_UTILS_PACKAGETYPE_UFBGA169_CSP115 0x00000010U /*!< UFBGA169 or WLCSP115 package type */
#define LL_UTILS_PACKAGETYPE_LQFP100_DSI 0x00000012U /*!< LQFP100 with DSI package type */
#define LL_UTILS_PACKAGETYPE_WLCSP144_DSI 0x00000013U /*!< WLCSP144 with DSI package type */
#define LL_UTILS_PACKAGETYPE_UFBGA144_DSI 0x00000013U /*!< UFBGA144 with DSI package type */
#define LL_UTILS_PACKAGETYPE_UFBGA169_DSI 0x00000014U /*!< UFBGA169 with DSI package type */
#define LL_UTILS_PACKAGETYPE_LQFP144_DSI 0x00000015U /*!< LQFP144 with DSI package type */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions
* @{
*/
/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE
* @{
*/
/**
* @brief Get Word0 of the unique device identifier (UID based on 96 bits)
* @retval UID[31:0]: X and Y coordinates on the wafer expressed in BCD format
*/
__STATIC_INLINE uint32_t LL_GetUID_Word0(void)
{
return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS)));
}
/**
* @brief Get Word1 of the unique device identifier (UID based on 96 bits)
* @retval UID[63:32]: Wafer number (UID[39:32]) & LOT_NUM[23:0] (UID[63:40])
*/
__STATIC_INLINE uint32_t LL_GetUID_Word1(void)
{
return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U))));
}
/**
* @brief Get Word2 of the unique device identifier (UID based on 96 bits)
* @retval UID[95:64]: Lot number (ASCII encoded) - LOT_NUM[55:24]
*/
__STATIC_INLINE uint32_t LL_GetUID_Word2(void)
{
return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U))));
}
/**
* @brief Get Flash memory size
* @note This bitfield indicates the size of the device Flash memory expressed in
* Kbytes. As an example, 0x040 corresponds to 64 Kbytes.
* @retval FLASH_SIZE[15:0]: Flash memory size
*/
__STATIC_INLINE uint32_t LL_GetFlashSize(void)
{
return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0xFFFFU);
}
/**
* @brief Get Package type
* @retval Returned value can be one of the following values:
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP64 (*)
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP100 (*)
* @arg @ref LL_UTILS_PACKAGETYPE_BGA132 (*)
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_CSP72 (*)
* @arg @ref LL_UTILS_PACKAGETYPE_UFQFPN32 (*)
* @arg @ref LL_UTILS_PACKAGETYPE_UFQFPN48 (*)
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP48 (*)
* @arg @ref LL_UTILS_PACKAGETYPE_WLCSP49 (*)
* @arg @ref LL_UTILS_PACKAGETYPE_UFBGA64 (*)
* @arg @ref LL_UTILS_PACKAGETYPE_UFBGA100 (*)
* @arg @ref LL_UTILS_PACKAGETYPE_UFBGA169 (*)
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP100_DSI (*)
* @arg @ref LL_UTILS_PACKAGETYPE_WLCSP144_DSI (*)
* @arg @ref LL_UTILS_PACKAGETYPE_UFBGA144_DSI (*)
* @arg @ref LL_UTILS_PACKAGETYPE_UFBGA169_DSI (*)
* @arg @ref LL_UTILS_PACKAGETYPE_LQFP144_DSI (*)
*
* (*) value not defined in all devices.
*/
__STATIC_INLINE uint32_t LL_GetPackageType(void)
{
return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x1FU);
}
/**
* @}
*/
/** @defgroup UTILS_LL_EF_DELAY DELAY
* @{
*/
/**
* @brief This function configures the Cortex-M SysTick source of the time base.
* @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
* @note When a RTOS is used, it is recommended to avoid changing the SysTick
* configuration by calling this function, for a delay use rather osDelay RTOS service.
* @param Ticks Number of ticks
* @retval None
*/
__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks)
{
/* Configure the SysTick to have interrupt in 1ms time base */
SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */
}
void LL_Init1msTick(uint32_t HCLKFrequency);
void LL_mDelay(uint32_t Delay);
/**
* @}
*/
/** @defgroup UTILS_EF_SYSTEM SYSTEM
* @{
*/
void LL_SetSystemCoreClock(uint32_t HCLKFrequency);
ErrorStatus LL_SetFlashLatency(uint32_t HCLKFrequency);
ErrorStatus LL_PLL_ConfigSystemClock_MSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32L4xx_LL_UTILS_H */